







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Kitchen Remodeling in Kendall: What to Know First
We provide independent Kohler kitchen remodeling in Kendall for homeowners who want their fixtures, sinks and cabinetry handled by crews that know the brand inside out. Most full kitchens take three to five weeks from demo to final walkthrough, and small or partial remodels often finish in under two. Prices here are written down before any work starts: full kitchen remodels in Kendall typically run $14,000 – $45,000 depending on layout, cabinet line and countertop material.
This page is for the homeowner who already has Kohler in the kitchen, or wants it there, and doesn’t want to gamble on a crew that’s never set a Kohler apron-front sink or pulled a Bellera pull-down faucet out of the box. Call (844) 560-5417 to set up your free estimate.
How Kohler Products Fail – and How We Fix Them
Kohler makes solid products. Most of what we see in Kendall kitchens going wrong isn’t the fixture failing outright, it’s a small installation or wear issue that compounds. Here’s what comes up most often, and what we do about it.
- Kohler Whitehaven apron-front sink settling. The Whitehaven and similar farmhouse sinks are heavy cast iron, and if the cabinet base wasn’t reinforced with a proper support frame at install, the front apron sags over several years. In Kendall’s humidity, the pine or MDF cabinet face around it swells too, so the gap looks worse than the sink actually is. We re-frame the base with treated dimensional lumber and reset the sink to level before any new cabinetry goes in.
- Bellera and Cruette pull-down faucet spray head leaks. The spray diverter inside these heads clogs with hard-water scale – and Kendall’s water runs hard – so the button stops switching and water drips from the head seam. Owners often assume the whole faucet is shot. Usually it’s the spray head assembly alone. We replace with OEM Kohler parts, which keeps the finish warranty intact; a generic head voids it.
- Kohler ceramic cartridge drip at the base. The ceramic disc cartridges in Kohler single-handle kitchen faucets are durable but not permanent. A slow drip at the spout usually means the cartridge seats are worn, not that the valve body is cracked. We pull the cartridge, inspect the seats, and swap OEM – aftermarket cartridges fit but often don’t seat cleanly and start dripping again within a year.
- Kohler enamel cast iron and the backsplash grout line. A Kohler enameled cast iron sink has a slight crown at the rim that some installers don’t account for, so the tile backsplash meets an uneven edge. We dry-fit the tile and set the first course against the actual sink rim, not the cabinet line, so the grout joint stays parallel.
- Kohler step-up and shallow-bowl sinks with the wrong drain. Certain Kohler prep and bar sinks need the right drain assembly depth. Put a standard drain in a shallow bowl and it sits proud, water pools. We match the drain to the model and test the flow with a full basin before we call the job done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Kohler Kitchen Remodeling Process
Every Kohler job runs the same steps. No shortcuts, no surprises at the invoice.
- 1
Free in-home estimate. We walk the kitchen, measure, look at what’s staying and what’s going, and talk through Kohler fixtures, cabinet line and countertop.
- 2
Written price and scope. You get a line-item written price before any work starts – not a verbal ballpark. This is the number that lands on your invoice.
- 3
Material selection. We help you pick from our trade brands – Kohler fixtures alongside KraftMaid or Wellborn cabinetry and Cambria, Silestone or Caesarstone countertops – and confirm lead times.
- 4
Demo and substrate prep. Cabinets come out, we check the wall and floor substrate (the layer under your finished surface), and fix anything that would undermine the new install.
- 5
Install, dry-fit, and test. Cabinets, countertop, tile, fixtures and Kohler product all go in. We test every faucet, drain and appliance hookup under load before cleanup.
- 6
Final walkthrough and guarantee. We walk the finished kitchen with you and hand over the written 365-Day Done Right Promise. If something fails in that year, we come back and fix it at no charge.
See the difference
Before
After
Before
After
Before
AfterWhat Kohler Kitchen Remodeling Costs in Kendall

These are the ranges we quote in Kendall for common Kohler scenarios. Your written estimate will land inside one of these, based on your actual layout and selections.
| Job | Typical range in Kendall |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small or partial kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the price: cabinet line (a semi-custom Wellborn or KraftMaid line versus a stock line), countertop material (Cambria quartz versus a laminate), whether you’re moving plumbing or electrical, and whether the existing substrate needs repair. Call (844) 560-5417 for an exact quote – estimates are free, and the written number is what we hold ourselves to.
Why Kendall Homeowners Call Penhallow Remodeling Kendall for Kohler Work
You’ve likely been through a remodel before where the price grew after demo day. We don’t do that. Every job starts with a written price and a written 365-Day Done Right Promise – if the work fails inside that year, we come back and make it right at no charge. A live person answers the phone 24/7, so you’re not chasing a callback. Our technicians have up to 22 years of experience and arrive background-checked and in uniform, so you know exactly who’s in your home.
We also work across the brands that sit beside Kohler in a typical kitchen: KraftMaid, Cambria, Toto and Silestone. We’re an independent Kohler service provider and not affiliated with or authorized by Kohler – our expertise comes from doing the work, not from a badge.
FAQs

No. We install OEM Kohler parts and follow Kohler’s installation guidance on every job, which is what preserves your finish and product warranty. Using aftermarket parts on a Kohler fixture is what typically voids it, and we don’t do that.
A full kitchen typically takes three to five weeks from demo to walkthrough; a small or partial remodel often finishes in under two. We give you a real arrival window at the start and hit it.
Yes, often. If the Kohler Whitehaven or your Bellera faucet is in good shape, we can reuse it and build the new cabinetry and countertop around it. We check the cartridge, spray head and sink support first and tell you honestly what’s worth keeping.
Repair usually wins. A leak or drip on a Kohler kitchen faucet is normally a cartridge or spray head, and swapping OEM parts costs far less than a new faucet – and keeps the warranty intact. We’ll tell you when replacement genuinely makes more sense.
Yes. When plumbing, electrical or structural work is involved, we pull the required permits and pass inspection. Permits are part of the written scope, not a surprise line item. Call (844) 560-5417 for a free estimate.
If you have Kohler fixtures in your kitchen and you’re ready to remodel – or you want Kohler set in right the first time – call Penhallow Remodeling Kendall at (844) 560-5417. We’ll schedule a free estimate, give you a written price, and put the 365-Day Done Right Promise in writing before a single cabinet comes out.
Written by the team at Penhallow Remodeling Kendall, serving Kendall and nearby areas.












