







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Kitchen Remodeling in Kendall: What to Know First
Cambria kitchen remodeling in Kendall is a countertop-led project: most of our Cambria jobs are full kitchens or partial kitchen remodels where the quartz is being replaced or reused, and a full remodel typically runs $14,000 – $45,000 with a written price before demo starts. Turnaround is usually 3 – 6 weeks for a full kitchen and 1 – 2 weeks for a counters-and-backsplash project, depending on whether cabinets change. This page is for Kendall homeowners who already own Cambria or are choosing it and want one contractor to handle cabinets, countertops, backsplash, and flooring without the finger-pointing that happens when three trades blame each other. Call Penhallow Remodeling Kendall at (844) 560-5417 for a free estimate.
How Cambria Products Fail – and How We Fix Them
Cambria quartz is engineered stone, not natural slab, so its failure modes in a Kendall kitchen are different from granite or marble. Here’s what we actually see, and what we do about it.
- Seam separation on the Newport and Torquay series. These lighter, vein-heavy patterns are usually fabricated in two or three pieces to fit a standard run, which means more seams than a solid-color slab. In Kendall’s humidity, a poorly bonded seam opens over a season. We cut and re-bond the joint with a color-matched epoxy, then re-polish the seam flush rather than caulking over it.
- Edge chipping on the Ella and Brittanicca lines. Those deep veining patterns are stunning, but an eased edge on Cambria chips at the corners if a cabinet has any flex. A sagging cabinet corner is almost always the real cause, so we check and shim the cabinet box before we touch the stone. A new edge profile on a stable base lasts.
- Heat crazing near the range. Cambria carries its own lifetime warranty, and heat damage is not covered by it. A slow cooker or a hot pan set down on the counter near the cooktop can craze the surface. We install a heat barrier and set the finished countertop edge at least 4 inches from the burner line, which is not something a catalog spec tells you.
- Under-mount sink failure. On Cambria jobs where the sink is held by adhesive only, the weight of a cast-iron basin can fail the bond. We set stainless steel clips into the substrate and re-seal, which is what Cambria’s install guidance actually calls for.
- Water staining at the dishwasher. A leaking dishwasher supply line is a common cause of a dark ring at the countertop edge, and homeowners often mistake it for a stain that won’t come out. We replace the line, dry the substrate, and re-set the edge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Cambria Kitchen Remodeling Process
- 1
On-site assessment. We measure every run, check cabinet level, and look at the substrate and sink mounts. You get a written price before we start.
- 2
Parts and materials decision. We quote OEM Cambria for any replacement slab so the lifetime warranty stays intact. For cabinet hardware, we lay out the OEM versus a quality aftermarket option side by side, so you decide on cost, not on a sales push.
- 3
Cabinet and layout work. If the layout changes, we set KraftMaid or Wellborn cabinets first, then template the Cambria to the actual box, not to the old drawing.
- 4
Countertop and backsplash install. Cambria is templated after cabinets are set, then set with proper clips and a heat barrier near the range. Backsplash and tile go in after the stone is in place.
- 5
Final check and cleanup. We test the sink, run the dishwasher, look at every seam, and clean the site before we hand you the paperwork.
- 6
The guarantee. Every Cambria job carries the 365-Day Done Right Promise in writing: if something we installed fails, we come back and fix it at no charge.
See the difference
Before
After
Before
After
Before
AfterWhat Cambria Kitchen Remodeling Costs in Kendall

The price of a Cambria kitchen job in Kendall depends mostly on how much of the kitchen changes and how many Cambria slabs are involved.
| Job | Typical Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation (Cambria) | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the number: slab count and fabrication (a veined Cambria pattern uses more material per run than a solid color), whether cabinets are refaced or replaced, and whether the layout changes plumbing or electrical. We quote line by line, so the number on day one is the number on the invoice. Call (844) 560-5417 for a free written estimate.
Why Kendall Homeowners Call Penhallow Remodeling Kendall for Cambria Work
We’re a reminder that the guarantee is the thing that lasts longer than the countertop. Every Cambria job comes with the 365-Day Done Right Promise, a written price before any work starts, and a live person on the phone 24/7. Our technicians have up to 22 years of experience and are background-checked and uniformed, so you know who is walking into your home. As an independent Cambria service provider, we’re not affiliated with Cambria, but we install it on every job where the homeowner chooses it, and we back it with our own written guarantee alongside Cambria’s lifetime warranty. We also work with KraftMaid, Kohler, Toto, and Silestone, so a kitchen with several branded products gets one crew and one number to call.
FAQs

Does installing Cambria quartz affect its manufacturer warranty? Only if it’s installed correctly. Cambria’s lifetime warranty stays in place when the slab is fabricated and set per Cambria’s install guidance, so we template after cabinets are set and mount the sink with clips as specified.
Can you match a Cambria slab to my existing counters if I’m adding an island? Yes, usually, but the match depends on the pattern. Veined patterns like Ella or Brittanicca can be color-matched from the current slab and recent production lots; older solid-color runs are harder. We bring samples and tell you honestly whether the match will look seamless or close.
Should I repair my Cambria counter or replace it? If the seam is open or the sink mount failed, repair is nearly always the right call, and it’s a fraction of a replacement cost. If the slab is cracked through or heat-crazed near the range, replacement is the answer.
How long does a Cambria kitchen remodel take in Kendall? Counters and backsplash run 1 – 2 weeks; a full kitchen with cabinetry runs 3 – 6 weeks. We give you a written arrival window and a defined schedule before we start.
Do you pull the permits? Yes, where the work requires them. We pull the permits and pass the inspections, and the written price covers it.
Written by the team at Penhallow Remodeling Kendall, serving Kendall and nearby areas.












