







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Walk-In Shower Installation Cost in Kendall?
Walk-in shower installation in Kendall typically runs $4,500 to $12,000, with most single-family homes in the area landing between $6,000 and $9,000 for a curbless shower with tile walls and a frameless glass panel. That range covers demolition of the old tub or shower, new waterproofing, plumbing rough-in, tile work, glass and fixtures. A simple alcove swap with a prefab pan sits near the bottom; a fully custom walk-in with a linear drain, built-in bench and frameless glass door sits near the top.
We give every Kendall homeowner a written price before any tile is pulled, so the number you see on day one is the number on the invoice. No surprises once the demo dust settles.
Key Takeaways
- Kendall walk-in shower projects usually cost $4,500 – $12,000, driven mostly by size, tile choice and glass.
- Tub-to-shower conversions ($3,500 – $10,000) are often cheaper because the drain stays put.
- South Florida humidity and concrete slab construction both affect what’s under your tile, and that affects price.
- Frameless glass alone can swing a quote by $1,200 – $2,800.
- Every job from Penhallow Remodeling carries a written price up front and our 365-Day Done Right Promise.

Walk-In Shower Installation Cost Breakdown (2026)
Here’s how a typical Kendall walk-in shower breaks down line by line. These ranges reflect what we see across our projects in the area, from The Hammocks to Kendale Lakes.
| Line Item | Typical Cost Range |
|---|---|
| Demo and haul-away (old tub or shower) | $400 – $900 |
| Plumbing rough-in (drain relocation, valve) | $500 – $1,800 |
| Waterproofing and cement board substrate | $600 – $1,400 |
| Shower pan or custom mud bed | $500 – $1,600 |
| Wall tile (materials and labor) | $1,200 – $3,800 |
| Floor tile and mosaic | $400 – $1,000 |
| Shower valve, head and trim (Kohler, Moen, Delta, Grohe) | $350 – $1,200 |
| Glass (frameless, semi-frameless or framed) | $900 – $2,800 |
| Built-in bench or niche | $300 – $1,200 |
| Permit and inspection (Miami-Dade) | $250 – $650 |
| Total installed | $4,500 – $12,000 |
What pushes a Kendall shower toward the top of that range? A custom mud-bed pan with a linear drain, large-format porcelain tile (which we cut differently than ceramic to keep the grout lines tight), and frameless glass. What keeps it near the bottom? A prefab acrylic pan, standard 12×24 tile, and a semi-frameless door. The middle of the range is where most of our Kendall jobs land: tile walls, a tiled floor, a curb you can step over, and frameless glass.
The cost of a walk-in shower also intersects with the rest of the room. If you’re also updating the vanity, a bathroom vanity installation runs $800 – $3,000 on top of the shower. When the scope creeps into re-tiling floors and swapping the toilet, you’re really looking at a full bathroom remodel ($9,000 – $28,000) and it makes more sense to price the whole room at once.
What Affects Walk-In Shower Installation Pricing in Kendall
Six things move a Kendall shower quote more than anything else. We walk every homeowner through these before we put a number in writing.
- Shower size and layout. A 36×60 alcove is the cheapest footprint to build. A 48×72 walk-in with a bench, niche and linear drain costs more because it needs a custom pan and more tile. Curbless (zero-threshold) designs add $600 – $1,500 for the slope work and waterproofing.
- Glass type. Framed glass runs $900 – $1,400. Semi-frameless sits in the middle. A full frameless 3/8-inch door with a return panel is $1,800 – $2,800. Most Kendall homeowners choose frameless, and we understand why: it makes a small bathroom feel bigger.
- Tile choice. Porcelain and ceramic are budget-friendly. Natural stone (marble, travertine) is beautiful but needs sealing, especially here. Large-format tile reduces grout lines but takes more cutting skill and more substrate prep, so labor goes up even as material stays flat.
- Concrete slab and plumbing. Most Kendall homes sit on slab, and moving a drain means cutting concrete. If the new shower lands where the old tub was, the drain usually stays put and you save $400 – $1,200. If you want the shower on the opposite wall, expect concrete work and a longer timeline.
- Permits and inspection. A shower replacement that touches the plumbing usually requires a Miami-Dade County permit. We pull it, schedule the inspection and handle the paperwork. Budget $250 – $650 for the permit itself; the cost of a failed inspection (redo) is far higher, which is why we never skip it.
- Humidity and ventilation. This is a Kendall-specific factor. Our year-round humidity means a poorly vented shower grows mold fast. We install proper waterproofing (the moisture barrier behind the tile, not just a painted-on sealer) and recommend a vent fan with a humidity sensor. Skipping that step is often why a shower that “looked fine” two years ago starts showing mold at the grout line.
Location around Kendall matters less than people think: a shower in a Hammocks townhome and one in a Pinecrest single-family are priced on the same labor and material lines. What changes is access: second-floor installs and tight parking compounds add a little labor. If you’re weighing a shower against keeping a tub, a tub-to-shower conversion ($3,500 – $10,000) is often the most cost-effective route because the plumbing stays in place.

How to Save on Walk-In Shower Installation
Nobody wants to overpay, and a few decisions make a real difference without cheapening the result.
- Keep the drain where it is. Reusing the existing drain location avoids concrete cutting and saves $400 – $1,200 with almost no visible difference in the finished shower.
- Choose porcelain over natural stone. A good large-format porcelain looks like marble at a fraction of the material cost and needs no annual sealing. The savings here can be $800 – $1,800.
- Go semi-frameless instead of frameless. If the budget is tight, a semi-frameless door saves $600 – $1,200 and still looks clean.
- Bundle with a small bathroom remodel. If the room needs paint, a new vanity and fixture updates anyway, doing it all in one visit saves setup and labor. A small bathroom remodel runs $5,000 – $12,000 and folds the shower into the bigger scope.
- Get a written price before work starts. This is the single best way to avoid the “price went up after demo” trap. We put it in writing, always. Call (844) 560-5417 for a free estimate.
Walk-In Shower vs. Shower Replacement vs. Tub-to-Shower Conversion
Homeowners often ask us which of the three they actually need. The answer depends on what’s already there and what you want to change.
- Shower replacement ($3,000 – $8,500): you have a shower, and you’re replacing it with another shower in the same footprint. Lowest cost, fastest timeline.
- Tub-to-shower conversion ($3,500 – $10,000): you’re removing a tub and installing a shower in its place. Drain usually stays, so cost stays modest.
- Walk-in shower installation ($4,500 – $12,000): the full build. New pan, new tile, new glass, custom layout, possibly relocated plumbing. Highest cost, most design freedom.
If you’re not sure which bucket you fit, we’ll tell you honestly on the first visit. Sometimes the smart move is a shower replacement in the same footprint, especially if the tile and glass are still in good shape and only the pan has failed.
How Long Does a Walk-In Shower Installation Take in Kendall?
A typical walk-in shower takes 5 to 10 working days from demo to final glass install. Straightforward alcove swaps run 5 – 7 days; custom showers with a bench, niche, linear drain and frameless glass run 8 – 12 days. The gap between phases is drying time (waterproofing, thinset, grout, silicone), not idle time. We give you a real arrival window for each phase and keep the schedule honest. If a tile shipment is delayed, you hear it from us the day we know, not after the crew is already standing in your hallway.
Miami-Dade inspections can add a day or two depending on the county’s schedule. We handle the inspection request and coordinate the timing so your project doesn’t stall waiting on a callback.
Permits and Codes for Walk-In Showers in Kendall
In Miami-Dade County, a shower installation that alters the plumbing (new drain, relocated valve, new supply lines) requires a plumbing permit, and a pass inspection before the wall gets closed up. The tile has to sit over a waterproofing membrane, not just cement board, and shower pans have to slope correctly to the drain. That slope is a building-code item, not a style preference: a pan that puddles or slopes the wrong way will fail inspection and, more important, will eventually leak into the unit below.
Why does this matter to your wallet? Because a shower installed without a permit becomes a problem when you sell the home. Unpermitted plumbing work can force a buyer’s inspector to demand a redo, and the cost of redoing a shower later is often higher than the original build. We pull the permit, we pass inspection, and we hand you the paperwork. It’s part of the job, not an upsell.
What’s Included in a Written Walk-In Shower Quote
A written price should tell you exactly what’s covered. Ours does. Here’s what we include on every walk-in shower quote in Kendall:
- Demo and haul-away of the existing shower or tub
- Plumbing rough-in and valve installation
- Waterproofing membrane and cement board substrate (the moisture barrier behind your tile)
- New shower pan or custom mud bed, sloped to drain
- Wall and floor tile, set with the grout and sealant specified in the quote
- Shower fixtures (Kohler, Moen, Delta, Grohe or whatever you choose)
- Glass door and panel installation
- Permit and inspection
- Final cleanup and a walk-through with you
And on the back end: our 365-Day Done Right Promise. If the shower leaks, the grout fails or the glass hangs wrong inside that year, we come back and fix it at no charge. That’s in writing on every project. A free second visit if something isn’t right, with no service call fee, because a callback isn’t a new job.
FAQs – Walk-In Shower Installation Cost
How much does walk-in shower installation cost in Kendall?
Walk-in shower installation in Kendall costs $4,500 to $12,000, with most projects landing around $6,000 – $9,000. That covers demo, plumbing, waterproofing, tile, glass and fixtures. Call (844) 560-5417 for an exact quote. Estimates are free.
Is it cheaper to install a walk-in shower or replace the tub?
A tub-to-shower conversion ($3,500 – $10,000) is usually cheaper than a full walk-in build ($4,500 – $12,000) because the drain stays in place and the scope is smaller. If you love a tub and just want a better one, a bathroom remodel can price that in, too. Call (844) 560-5417 and we’ll walk you through both options.
Can you install a walk-in shower in a day?
No. A walk-in shower takes 5 to 10 working days because of drying time between waterproofing, thinset, grout and silicone. Prefab shower units can go in faster, but a tiled walk-in with frameless glass cannot be rushed without risking a leak. Call (844) 560-5417 to schedule a walk-through.
Do I need a permit for a walk-in shower in Kendall?
Yes, in almost every case. If the work touches plumbing, Miami-Dade County requires a permit and inspection. Budget $250 – $650 for the permit itself. We handle it. Call (844) 560-5417 for a written quote that includes permit costs.
Why does Miami-Dade humidity matter for a walk-in shower?
Our South Florida humidity means a shower without proper waterproofing and ventilation grows mold fast. We install a real membrane behind the tile and recommend a humidity-sensing vent fan. The extra $200 – $500 for proper waterproofing and a fan is small next to a $3,000 redo two years later. Call (844) 560-5417 if you’ve already got a mold problem.
Is it cheaper to repair or replace an existing shower?
If the tile and pan are sound and only the valve or glass is failing, repair is cheaper: a new valve runs $350 – $700 and a new door $900 – $1,400. If the pan has failed or the waterproofing is gone, replacing the shower ($3,000 – $8,500) is the only fix that lasts. Call (844) 560-5417 and we’ll tell you which side you’re on.
Can I see what a walk-in shower looks like before you build it?
Yes. We walk you through tile and glass samples and give you a written scope that describes the layout, drain type, tile format and glass style before anything is ordered. That’s how you avoid the “it didn’t look like the rendering” problem. Call (844) 560-5417 to book a design visit.
Why Kendall Homeowners Call Penhallow Remodeling
Every walk-in shower we install comes with a written price before any work starts, a real arrival window, and our 365-Day Done Right Promise in writing. Our technicians have up to 22 years of experience each, they’re background-checked and arrive in uniform, and a live person answers the phone 24/7, not a voicemail prompt. We’re part of the Kingswell family of companies, operating under The Kingswell Way since 2004, and materials come from familiar names like Kohler, Moen, Delta, Grohe and Toto because the products behind a guarantee matter as much as the guarantee itself.
If you’re remodeling the whole room, we can fold the shower into a bathroom remodel or a small bathroom remodel and price it all in one written scope. If the shower is the only thing going in, that’s a fine project too. You’ll see the number before we pick up a trowel.
Curious which neighborhoods we cover? Take a look at our Kendall service area, and check our bathroom remodeling service for the full picture. Pair a shower with a bathroom vanity installation and the room updates in one trip.
Get a Written Walk-In Shower Price in Kendall
Call (844) 560-5417 for a free estimate. We’ll walk the room with you, explain what’s behind the tile, and put the price in writing before any work starts. A live person answers 24/7, so you don’t have to wait for a callback. If the work fails inside the year, our 365-Day Done Right Promise means we come back and fix it at no charge. That’s in writing too. Get the number you can hold us to before demo day, not after.
Pricing reflects the Kendall market as of 2026. Penhallow Remodeling Kendall offers free estimates – call (844) 560-5417.
What Our Customers Say
"Gutted and redid the master bath. They gave me a schedule and actually stuck to it. Any time there was a choice to make they called me instead of guessing. Love the result."
- Kayla Benton"Solid kitchen remodel. The only hiccup was a mixup on the cabinet hardware that added a few days, but they ordered the right ones and didn't charge me for their mistake. Would hire again."
- Gregg Lanier"Full home refresh before we sold. They were straight about what was worth doing and what wasn't to get our money back. On time, on budget, and it sold in a week."
- Monica Vaughn












